Tag: setup

Setting Up NanoKontrol – Sonar

The following is a tutorial on mapping the Korg NanoKontrol to Sonar… If you’re looking to setup the NanoKONTROL for Reaper then click here To start check your installation of the driver is correct – Install Korg NanoKONTROL usb Driver —–>>> Setting up the NanoKontrol is quite simple really – for this tutorial I’ll be […]

Setting Up – Korg NanoKontrol – Driver

This article covers installation of the NanoKONTROL – it’s designed for the newbie and is written in such a manner. Video Guide This guide was also written as a check for the Set Up NanoKONTROL with Sonar guide If you are having problems installing the driver(usb device installed instead of Korg Driver) then scroll to […]

Midi and Vst setup – Sonar

Click on the midi track number, As shown below. It it will turn yellow To assign the ‘Vst instrument’ Left Click the box the arrow is pointing at. Choose Vst instrument. For Vst Instruments that have several instruments assigned to different channels. If you have setup your VST to have multiple instruments on channels 1-16 […]

Setting up sound card in Sonar

Go to – ‘Options’ – ‘Audio’ Choose your preferred sound card from the drop down menu. Now we choose which kind of driver you need. If you are sure your sound card supports ‘ASIO’ then choose that option. If it doesn’t then try ‘WDM’ If you experience problems then choose ‘MME’ Make sure you click […]

Introduction – Requirements

The basics first. For a computer based recording system. A PC – today most PC’s have enough power to run a basic setup. Onboard sound cards – although not the best setup – are adequate to get started. Laptops also have this bare minimum requirement. A useful download to start with is ASIO4ALL – a […]

Setting up the sound card

Go to – ‘Options’ – ‘Audio’ Choose your preferred sound card from the drop down menu. Now we choose which kind of driver you need. If you are sure your sound card supports ‘ASIO’ then choose that option. If it doesn’t then try ‘WDM’ If you experience problems then choose ‘MME’ Make sure you click […]

Midi and Vst Instrument Setup

Click on the midi track number, As shown below. It it will turn yellow To assign the ‘Vst instrument’ Left Click the box the arrow is pointing at. Choose Vst instrument. For Vst Instruments that have several instruments assigned to different channels. If you have setup your VST to have multiple instruments on channels 1-16 […]