Tag: control surface

Behringer BCF2000 and Sonar 7 setup Pt 1

Guide on how to setup Behringer BCF2000 with Sonar 7. Just got this device for £50 from ebay and got to say it’s a cool bit of kit, but the setup can be quite painful. Below is a walkthrough on how to get up and running with Sonar 7. As I’m new to this device […]

X-Session UC-17 & ACT Sonar setup FX

Here is a guide to setting up the X-Session UC-17 to control VST FX in Sonar 7 It is part 1 – showing you how to setup a Control Surface and how to use the ‘midi learn’ function. This guide is a more advanced version of the article, X-Session UC-17 – How to setup ACT/Sonar […]

X-Session UC-17 – How to setup ACT/Sonar

Setting up the Evolution UC-17 X-Session is to be honest a right royal pain in the bum… If you’ve got one and are stuck then I sympathize. EDIT: Before you go onto the written tutorial have a look at this post, X-Session UC-17 & ACT Sonar setup FX Continue… Basically to setup in Sonar you […]

Setting Up NanoKontrol – Sonar

The following is a tutorial on mapping the Korg NanoKontrol to Sonar… If you’re looking to setup the NanoKONTROL for Reaper then click here To start check your installation of the driver is correct – Install Korg NanoKONTROL usb Driver —–>>> Setting up the NanoKontrol is quite simple really – for this tutorial I’ll be […]

Setting Up – Korg NanoKontrol – Driver

This article covers installation of the NanoKONTROL – it’s designed for the newbie and is written in such a manner. Video Guide This guide was also written as a check for the Set Up NanoKONTROL with Sonar guide If you are having problems installing the driver(usb device installed instead of Korg Driver) then scroll to […]