Setting Up NanoKontrol – Sonar

The following is a tutorial on mapping the Korg NanoKontrol to Sonar…

If you’re looking to setup the NanoKONTROL for Reaper then click here

To start check your installation of the driver is correct –

Install Korg NanoKONTROL usb Driver

—–>>>

Setting up the NanoKontrol is quite simple really – for this tutorial I’ll be using Sonar 7 Producer Edition.

(make sure you’re nano is plugged in and setup correctly – last chance or this won’t work)

Fire up Sonar,

Now look along the top and find ‘Options’ choose – MIDI Devices

Click To See Larger

Put a tick next to nanoKONTROL 1 SLIDER/

korgsetup2

korgsetup3

Click controller surfaces,

korgsetup4

This box will appear

korgsetup5

Click this icon

korgsetup6

to add new controller.

korgsetup7

Choose ‘Cakewalk Generic Surface’

korgsetup8

Make sure Input says ‘NanoKONTROL’ – if nothing is there then something went wrong – if another device is listed check for Nano in dropdown…

Click Ok.

And close box.

——->>>

Now you need to look for the following,

korgsetup9

Once you’ve found it click the button next to the ‘a’,

korgsetup10

This will open the following screen,

korgsetup11

In presets enter a name, I’ve entered, ‘NanoKONTROL’

korgsetup12

Save it by clicking the disc icon.

Remember to do this after every action from here on in.

We don’t want any accidents.

Change ‘Number of Track Strips‘ from 1 to 32 – maximum available.

korgsetup13

Remember to do this after every action from here on in.

See the ‘Configure Strip Number’ – that is our first track to be assigned after we’ve set up our first one you’ll change that number to carry on setting up all 32 channels.

Be aware you’ll be using the ‘Scene’ button on your Korg once you get to number ’10’.

Get a peice of paper and make notes of what you’re doing if needed.

So ok here we go.

Parameter 1 – from drop down choose volume(it’s already selected I know but bear with me).

korgsetup14

Now click and hold the’learn’ button,

learnbutton

While holding move the 1st – ‘Fader’ on the Korg

Release the ‘learn’ button and test – you should see activity on Track 1 of  Sonar.

Make sure the Volume moves – it is does we’re good to go – if something else moves check your settings and try again.

If there is no movement make sure the Korg is setup properly and seen by Sonar.

Next?

Go to parameter 2

korgsetup15

Choose ‘Pan’ – click and hold learn button.

learnbutton

click and hold learn button and move the ‘rotary’ on the Korg – make sure it’s on channel 1!

Release ‘learn’ button and test – track 1 on should show panning movement.

Well done, if everything worked you now have Volume and Panning working.

You could now assign the buttons. Use the parameters, so;

‘Parameter 3’ could be Mute

‘Parameter 3’ could be Solo.

It’s up to you – just follow the instructions as above.

COUPLE OF THINGS!!! —>>>sorry for shouting but needed to grab your attention.

Remember to change strip number to new channel as you go!!!

And don’t forget to save as you go.

——>>>>

Setting up the transport buttons is very similar.

You need to start from the beginning though.

Follow instructions through to this stage, and choose ACT controller instead,

korgsetup8

Click on Ok and close – now we’re ready to setup.

Now click on

korgsetup9

Choose ‘ACT Controller’

And open properties as before – this will bring up another screen.

korgsetupact1

Click ‘Options’ tab

korgsetupact2

You now have a choice.

Flick back and take a look at the bottom line – boxes B1, B2,B3,B4

B1 is set up as ‘Transport Rewind’.

B2 is set up as ‘Transport Stop’.

B3 is setup as ‘Transport Play’.

Lets setup B4 setup as ‘Transport Record’

Click ‘Options’ tab again.

Under Buttons – change to B4 and then open ‘ACT Enable’ – and scroll down until you find ‘Transport Record’.

korgsetupact3

Now click on ‘Controllers’ tab.

Click on box under ‘B4’ – it should see this,

midilearn

Press ‘Record’ button on korg – done.

Follow instructions for other buttons and you should be set up.

Don’t forget to save the preset. I usually call it something like ‘KorgTransport’.

—–>>>

Well done, hopefully now you are setup and get playing.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.